Print Page - NI SCXI 1521 Calibration Procedure

Title: NI SCXI 1521 Calibration Procedure
Post by: step30044 on 03-23-2010 -- 15:48:37

Does anyone know where I can get my hands on a calibration procedure for a National Instruments SCXI 1521? Needed ASAP :-o

Thanks

Title: Re: NI SCXI 1521 Calibration Procedure
Post by: djquinlan on 03-23-2010 -- 16:27:57

I don't think NI has posted a specific procedure for the SCXI 1521 yet. I know there is one posted for the SCXI 1520. There is also a sytem calibration procedure in the user maual, however, this is mostly to correct for offsets and also to verify the shunt's calibration. National Instruments has posted their manual calibration procedures at ni. com/calibration.

Title: Re: NI SCXI 1521 Calibration Procedure
Post by: step30044 on 03-23-2010 -- 17:37:50

Thanks for the response I have checked there site and no automated or manual procedure is currently available.

Title: Re: NI SCXI 1521 Calibration Procedure
Post by: Enigma on 05-07-2010 -- 18:19:58

Hi, I was wondering if you were able to get a procedure for the 1521. We currently use calibration executive from National Instruments to calibrate our 1521 but before it was supported by there software we had a procedure from NI and a vi to help with the calibration. I can check if I can get you a copy of how we did the calibration if you are interested?

Title: Re: NI SCXI 1521 Calibration Procedure
Post by: step30044 on 05-08-2010 -- 18:30:16

NI stepped up to the plate and created a procedure for us. Its still awaiting final approval but thanks for the offer. :-D

PMEL Forum

K Sections => Software & Automated Calibrations => Topic started by: step30044 on 03-23-2010 -- 15:48:37