Text only | Text with Images

PMEL Forum

K Sections => K1/8 - DC/Low Frequency => Topic started by: Hawaii596 on 05-28-2013 -- 14:43:49

Title: Uncertainty Template in Excel for Multiple Fluke 732B
Post by: Hawaii596 on 05-28-2013 -- 14:43:49
Anyone have an Excel template for doing regression analysis for combined uncertainty of multiple Fluke 732B's?  Trying to put together per Fluke White Paper about maintaining 10 VDC at 0.3 ppm or better.  I have multiple 732B's and getting ready to schedule first cal.  Math is a little crazy.
Title: Re: Uncertainty Template in Excel for Multiple Fluke 732B
Post by: scottbp on 06-06-2013 -- 10:06:57
I was going to share mine, but it appears it's too large at 197 kb (maximum file upload size is 192 kb... This forum is WAY behind the times when it comes to file sharing.)
Title: Re: Uncertainty Template in Excel for Multiple Fluke 732B
Post by: Hawaii596 on 06-09-2013 -- 20:20:40
Any chance I could PM and send you my email address to send file?
Title: Re: Uncertainty Template in Excel for Multiple Fluke 732B
Post by: scottbp on 06-12-2013 -- 17:21:40
Sure, go ahead, PM me...
Title: Re: Uncertainty Template in Excel for Multiple Fluke 732B
Post by: rjf1957 on 06-14-2013 -- 08:13:41
Mind if I PM also?
This would seem to fit nicely with the NCSLI tutorial I'll be attending: Control Charts and Stability Analysis for Calibration Laboratory Reference Standards.
Text only | Text with Images