PMEL Forum

K Sections => Software & Automated Calibrations => Topic started by: TimK on 03-16-2016 -- 11:52:24

Title: Cal software fot TEK TDS460A
Post by: TimK on 03-16-2016 -- 11:52:24
Hi, looking for a copy of the TEK TDS460A scope cal software.

Thanks

Title: Re: Cal software fot TEK TDS460A
Post by: Hawaii596 on 03-16-2016 -- 13:07:13
Send me a pm with your email and I will email a zip file copy.
Title: Re: Cal software fot TEK TDS460A
Post by: lonewolf on 04-27-2016 -- 03:08:37
would that be the same Field Adj SW for the TDS420a ?
Part Number 063 2634 00
Also known as 0632634, 063-2634-xx, 128-816, 128816, testpath 128816, tektronix 0632634, tek 063263400, and a few others I didn't mention.

I've been searching the web for like 4 years for it, I've repaired a couple of the TDS420A with the bad capacitors, those caps are nasty, they eat traces and destroy surrounding components too.

In fact I just ordered a set of caps from Digikey tonight, I have one sitting on my bench that belongs to me that needs the overhaul :)

most of the Field Adj SW is found on the link below, but not for the TDS400 series.

http://www.ko4bb.com/getsimple/index.php?id=manuals

I'm sure you are tired of folks asking, but I sure could use a copy too, Please.

I read your posts some time back when you were sorting all those floppies out.

if it is OK it would be nice to have that file on the website I posted.

Thanx
Title: Re: Cal software fot TEK TDS460A
Post by: Hawaii596 on 04-27-2016 -- 12:05:39
Send me a pm about this.  Should be able to assist.  Please include an email address to send to.