Thunder Scientific 2500 CBT

Started by dminesinger, 04-14-2015 -- 17:52:24

Previous topic - Next topic
Print
Go Down Pages1
User actions

dminesinger

04-14-2015 -- 17:52:24
Does anyone know of a CBT for the Thunder Scientific 2500? Or a good training video for it.
PapaBear

*'It's the Veteran, not the reporter who has given us the freedom of the press.'
'It's the Veteran, not the poet, who has given us the freedom of speech.'
''It's the Military who salutes the flag, who serves beneath the flag, and whose coffin is draped by the flag, who allows the protester to burn the flag.'

Hawaii596

#1
04-15-2015 -- 14:12:35
Ask CPGRULES about it.  He knows about using and calibrating the Thunder Scientific 2500, and would probably know if there is any CBT or other training available.  If you message him, tell him I sent you.  Could be he could answer some questions about the system if no training is available.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

silv3rstr3

#2
04-16-2015 -- 10:55:39
Section 4 of the maintenance manual breaks down the calibration fairly well.  I calibrated ours last year and it's definitely time consuming!  I also used a PRT connected to a 3458A for the temperature calibration to make sure to get the correct coefficients stored. 
"They are in front of us, behind us, and we are flanked on both sides by an enemy that out numbers us 29:1. They can't get away from us now!!"
-Chesty Puller
Print
Go Up Pages1
User actions