Guildline 9975 Manual Needed

Started by Hawaii596, 09-30-2009 -- 18:06:27

Previous topic - Next topic
Print
Go Down Pages1
User actions

Hawaii596

09-30-2009 -- 18:06:27
I'm in process of bringing my Guildline 9975 online and need a manual.  I have a small assortment of GIDEP procedures which will help.  But one thing I'm told by MI is that I need to do the null calibration.  If anyone even has the null cal procedure and/or the basic operating criteria (to make sure I don't damage it with excess anything) and make sure I'm properly nulling.  It is somewhat intuitive but not very. 

Thanks for any help anyone could give.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

WestCoastCal

#1
10-05-2009 -- 10:23:51
We have one, It's titled "Technical Manual for model 9975 Direct Currect Comparator Resistance Bridge"  TM9975-C-01 may be the document identifier. The Addendum October 29th, 1984.  If you still need this, email me your address and UPS account number and I'll loan it to you.  (on a personal note, its a shame your company won't upgrade, these things are circa 1973)

Hawaii596

#2
10-05-2009 -- 10:29:05
This is phase one.  I JUST got it repaired and trying to bring online.  I'll send you a PM here in a little bit.  Thanks very much for the offer.  I may well take you up on it.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883
Print
Go Up Pages1
User actions