Lockheed Martin Sr. Metrologist, Syracuse, NY

[Wisdo]

Req ID: 181703BR
Industry Job Title: Metrologist Sr
Standard Job Code/Title: E1853:Metrologist Sr

Required skills: BS Degree in related discipline, such as Electrical Engineering, Physics or other Sciences, or equivalent experience.  Experienced with a strong background and use of RF/Microwave and electronic test equipment.  Proficient in the development of automated calibration procedures.  Experience in calibration and repair of a broad range of inspection, measuring and test equipment.  Experience in determining calibration requirements, performing uncertainty calculations and statistics skills.  Experience in the use of computers, connectivity, Microsoft Office, instrumentation control utilizing automated calibration software.  Familiarity with AS 9100, ANSI Z540 or ISO/IEC 10012 and ISO 17025 standards.  Ability to work in a team environment. 

Desired skills: Experience in instrumentation control utilizing programming language/environments (MetCal, Agilent VEE, SureCal, LabView).  Test Engineering experience with the use of RF/Microwave and general purpose electronics test equipment, electrical standards and working knowledge in vibration, mechanical, temperature, humidity and fiber optics.  Understanding of developing uncertainly calibration measurements.  Prior experience with ANSI Z540, ISO/IEC 10012 and ISO 17025.  Effective communication skills with internal and external customers.  May be certified in lean and six-sigma quality engineering methodologies. 
Specific Job Description Position is for an Electronics Metrologist to support the metrology organization at MS2 Syracuse facility.  Develop procedures and processes for calibration, troubleshooting, repair, and adjustment on Electrical/Electronic/RF Test & Measurement Equipment (T&ME) such as, but not limited to: waveform, microwave, time & frequency, phase, analog, oscilloscope, and digital calibrations.  Analyze system errors, interpret and utilize NIST and/or other International Standards Organization (ISO) or other reports and corrections for any level of calibration and measurement.  Maintain current knowledge of all electrical/electronic equipment and measurement techniques to perform state-of-the-art measurements.
Perform the following duties for the Metrology laboratory functions: develop software and manual calibration procedures/repair techniques for new types of instruments; maintain and update changes to existing calibration procedures by determining substitution of instruments, supporting equipment, and methods; determine range and accuracy requirements of laboratory equipment necessary to perform valid calibrations and/or repairs.
Generate and proof testing of new calibration procedures, reviews, and updates of old procedures to reflect new technology and/or equipment improvements.  Develop new calibration and/or repair techniques and substitution of instruments and components.  Perform and maintain uncertainty analysis, reports, and check standards for the accreditation in measurement parameters.  Develop procedures for test and check standard data to meet accreditation standards.  Prepare trend charts for the calibration reference and check standards.
Participate in Government and commercial audits, assessments, and round robins such as the MIP (Measurement Intercomparison Program), MAP (Measurement Audit Program), and accreditation audit programs.  Indentify instruments which can no longer be maintained within specified tolerances or operate throughout a specified range and recommend appropriate solution such as retirement, duration, limited performance, etc.  Investigate out-of-tolerance conditions for laboratory standards to determine impacts to workload processed.  Participate in equipment capital planning activities
Utilize the calibration management system in the performance of duties.
As directed, perform necessary liaison with company and vendor personnel to investigate instrument malfunctions or measurement problems.  Provide guidance and assistance to Associates and other employees, and perform related duties, as required. 
Standard Job Description Develops and evaluates calibration systems that measure characteristics of objects, substances, or phenomena, such as length, mass, time, temperature, electric current, luminous intensity, and derived units of physical or chemical measure.  Identifies magnitude of error sources contributing to uncertainty of results to determine reliability of measurement process in quantitative terms.  Develops calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems and accuracy and precision requirements. 

Security Clearance: Secret

Typical Minimums: Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree.  Considered career, or journey, level. 

LMCareers Business Unit: ESS6500 MS2
Business Area: Electronic Systems
Department F331: Syracuse Calibration
Job Class: QA/Test and Inspection
Job Category: Experienced Professional
City/Building Location: EP 5
State: New York
Virtual: No
Relocation Available: Negotiable
Work Schedule: FLEX-Non-Standard 40 hour week
Req Type: Full-Time
Direct/Indirect: Indirect
Shift: First

Please apply online @ www. lockheedmartinjobs. com

Lockheed Martin utilizes our own internal Recruiting Centers to fill our employment needs.  If you are contacted over the phone or e-mail by a company listing a Lockheed Martin job and requesting your personal information, allegedly on Lockheed Martin's behalf, please do not respond.

Lockheed Martin is an Equal Opportunity/Affirmative Action Employer.

[Wisdo]

Position is still available!

[Wisdo]

Bump!  :-D