Immediate Need for a Metrology Engineer

[metcal]

Cummins, Inc. has an immediate need for an experienced Metrology Engineer in our Fuel Systems Dimensional Metrology Center located in Columbus, Indiana.  Qualified candidates with experince in:

Coordinate Measuring Machine (CMM) operation and programming

Form Measurements (roundness, radial run-out, axial run-out, concentricity, coaxility, total radial run-out, total axial run-out, cylindricity, straightness, parallelism, perpendicularity, angularity, flatness, conicity, line form, position, cone form, diameter)

Surface Texture Measurement and Analysis

Experience with equipment such as Mahr MFU100, Taylor-Hobson Talysurf, Tropel Flatmaster, Zygo NewView, SIP CMM, Starrett Criterion CMM, View Optical CMM, and Werth VideoCheck Optical CMM is highly desireable.

For full position description and to apply:
http://webconnect.sendouts.com/index.aspx?ID=cummins&SiteID=webconnect&Group=cummins&Key=CN&PostId=cf5fe925-7693-40e3-b77b-547be39d38fa&CnId=&ApplyNewCan=0&PostNum=1929