Cirris 1100H+ Hipot Tester Cal Procedure

Started by Hawaii596, 09-15-2011 -- 15:11:03

Previous topic - Next topic
Print
Go Down Pages1
User actions

Hawaii596

09-15-2011 -- 15:11:03
Anyone have a Cirris 1100H+ Hipot Tester Cal Procedure; or possibly have some experience with them; or PDF manual.  I need to calibrate one, and having a tough time finding anything.  GIDEP doesn't have anything that I could find.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

michthai

#2
09-15-2011 -- 20:24:51
I do have a metcal procedure for some of their other models (CH+ and the Touch 1) if you are interested.

Hawaii596

#3
09-16-2011 -- 08:57:52
We have MetCal, but this won't be at the lab.  I would really like to take you up on that.  I did go to their website to request a manual as well, by the way.  I guess I'll see if I get it on time.  Thanks very much for the input.  If you are interested in possibly sharing the automated procedure, send me a PM and we can email about it.  Thank you again.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883
Print
Go Up Pages1
User actions