Fluke 9530 Active Heads

[calright]

Has anybody replaced the cables on one of these active heads?

Thanks

[RFCAL]

Yes, you will need to crack the seal,but other than that it's pretty straight forward.

[Bryan]

open the head by removing right side label (side with serial #)
remove a couple screws and it opens up.
cable has a strain relief held in place with a couple hex or torx screws and cable tip is soldered to a board.
I usually have to remove a bit more insulation from the coax center conductor fo a good fit.
part # is 2058031  about $1200 as of Jan 2012.