Veriteq 5000A Interface Cable/Connector

Started by Hawaii596, 07-08-2014 -- 09:38:56

Previous topic - Next topic
Print
Go Down Pages1
User actions

Hawaii596

07-08-2014 -- 09:38:56
Can anyone identify the connector type or where to get cables for the Veriteq 5000A-RH/T Temp Humidity dataloggers?  Just got access to a few and need to get cables for them. 
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

Bryan

#1
07-08-2014 -- 12:08:39
Looks like they are working with Fluke, might be able to find something from them.
http://www.fluke-cz.cz/comx/show_product.aspx?pid=30494&product=CSTORTMP&type=4&locale=cyen


NC-Cals

#2
07-10-2014 -- 08:38:25
Veriteq was bought out by Vaisala, at least for their VL-2000 and VL-1000 line. I can't tell by the picture but this logger may use the old style VL-2000 cable. If the end connector is square, then it is the old style cable. We have the cables and software not only to log these, but to align them as well.

Hawaii596

#3
07-11-2014 -- 08:29:03
If you will send me a PM with your email address, we can communicate there, and I can send you a photo of the end connector.  It is a DB9 on one end, and what looks a little like a mini-version of DB9 on the unit end.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883
Print
Go Up Pages1
User actions