Rotek 8100 Full Specs, Data Sheet or Procedure

Started by Hawaii596, 02-25-2013 -- 08:15:36

Previous topic - Next topic
Print
Go Down Pages1
User actions

Hawaii596

02-25-2013 -- 08:15:36
Anyone have full specs (not the partial specs on their website), data sheet (or even if you've sent one out for data cal, the data pages from the certificate record), or perhaps a full cal procedure.  I found a Rotek 810A on GIDEP, but not the 8100.  Any help appreciated greatly.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

beadwork

#1
02-26-2013 -- 06:21:48
Contact Carol Blair at Rotek for the manual. 

Phillies_2012

#2
02-27-2013 -- 17:46:39
I just took a quick look in our MudCats SpecTrack system and found a Rotek 8100 Specsheet.  It looks like the full spec, but you can check it out to see if it is what your looking for.  Since you don't have SpecTrack, I am going to attach a printout p1 of the SS file as an bmp file so that you can see what you need to see to get the flow of the document.  I will put the rest in an attached RTF file that has no symbols, but you should be able use the data.  Good Luck

Hawaii596

#3
02-28-2013 -- 08:23:02
Awesome.  Exactly what I needed.  Thanks very much.  Already downloaded.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883
Print
Go Up Pages1
User actions