MetCal LIB FSC Component Definition Help

[DigitalCraze]

Hello All.

I have a pretty involved question regarding importing COM and .dll methods/functions into MetCal via the LIB FSC import wizard. Specifically importing a .dll manually.

Is there anyone here who knows how to do this, or can point me in the right direction for documentation that can help me do this?

If needed I can elaborate on more specifics, but I figured this would be the easiest way to get started with my question.. haha

Thanks in advance to anyone who can help.

[CalLabSolutions]

ALL I have to say is... RUN!
RUN as far and as FAST as you can from the LIB FSC!

If you want to calibrate PXI Instruments in MET/CAL I recommend doing it like this..
https://www.callabsolutions.com/calibrating-a-uut-on-a-remote-computer-using-fluke-metcal/#more-646
It works both on a local computer or a remote computer.  And it is way more reliable!

If you simply want more power then MET/CAL has to offer I recommend an UPGRADE to Metrology.NET!
http://www.metrology.net/timetoswitch/

Mike

[silv3rstr3]

I found all sorts of errors in the PXI Met/Cal procedures on the Fluke website.  The multimeter procedures are faster than Calibration Executive.  Others hang up and take way longer than Cal Exec.   

That's impressive you calibrated those two signal generators at the same time and all on the same GPIB!!